This blind test helps you assess the upper limit of your hearing frequency range. This test is an extension of our High Frequency Response and Hearing Test.
While both tests measure the same limit, the blind test will give you results that are probably closer to your real life listening experience. Instead of generating a pure sine sweep such as in our initial test, we are now using white noise. Noise induces a masking effect: the sound produced in your audible range will now mask the frequencies located at the very edge of your hearing range, reducing your audible frequency range.
Using noise also minimizes the side effects of aliasing (by masking the aliased frequencies as well).
|Full Range||Below 12kHz|
The first one plays back full range white noise, with frequencies extending up to 22 kHz. The second file plays back a low-pass filtered noise, with no sonic content above 12 kHz. Listen to both files: if you think you can hear a difference try the test below, otherwise pick a lower cutoff frequency at the top of this column.
|Full Range Below 12kHz|
|Listen to [?] then vote — multiple guesses not allowed (your vote triggers a new draw)|
To pass a blind test, you will need to perform 10 trials at least, obtain a high score and reach a high confidence level: 95% is standard to rate statistical significance. It means that your score outperforms random guesses by 95%. There is still a probability that you just got lucky though, 5%. To reduce such probability to 1%, keep testing until you reached a confidence level of 99%.
Is AudioCheck free? Not for me. Your support keeps this site running. Any donation will be rewarded with • uncompressed .wav files downloads for every test • increased durations and sample rates up to 192 kHz in the Tone Gen section • no ads • a suggestion box on every page
|← EU residents click here|
If you already are a patron, please log in.