Your payment is being processed. You will be redirected in a couple of seconds...

Blind testing a 100 ms Timing Difference (2-way)

Change the target here:  1ms  2ms  5ms  10ms  20ms  50ms  100ms 


This test will help you evaluate the shortest time difference you can hear. This version is the easy one, intended for home-theatre users. You will be asked whether two sounds are synchronized, or not (2-way test).

Musicians and studio engineers, please switch over to the 3-way test (more difficult).

Files being tested

Sync Delay (100ms)

The first file plays an electronic bass drum and an electronic high-hat simultaneously in sync. The other file, introduces a 100 ms delay between the high-hat and the bass drum. Can you hear the difference? If you think so, confirm with the blind test below, or change the target to a shorter timing (on the top of this page).

In a typical 2.1 or 5.1 speaker system, the kick drum will be reproduced by your subwoofer, and the high-hat will be coming from your satellites. At very low timings — 1 or 2 ms, possibly 5 ms in a large room — the different distances between the satellites, the subwoofer, and your ear may cause the 'delayed' variation to be more 'in-sync' by the time the two sounds hit your ear than the actual 'sync' variation. If your speaker system uses a subwoofer, it is recommended that you take this test while wearing headphones, unless you want to test the timing of your speakers.

The Test

Sync Delay (100ms)
Listen to [?] then vote — multiple guesses not allowed (your vote triggers a new draw)

To pass a blind test, you will need to perform 10 trials at least, obtain a high score and reach a high confidence level: 95% is standard to rate statistical significance. It means that your score outperforms random guesses by 95%. There is still a probability that you just got lucky though, 5%. To reduce such probability to 1%, keep testing until you reached a confidence level of 99%.

If you didn't pass this test, try with a longer delay. Change the target on the top of this column.

Help Me Help You!

Is AudioCheck free? Not for me. Your support keeps this site running. Any donation will be rewarded with • uncompressed .wav file download for every test (a download arrow will appear next to each sound icon) • increased durations and sample rates up to 192 kHz in the Tone Gen section • and, best of all, the removal of these pesky payment buttons below 😜

If you already are a patron, please log in.

Take up the challenge

  • Find the smallest difference in sound levels you can detect. 
    The Level Series:  6dB  3dB  1dB  0.5dB  0.2dB  0.1dB 

  • Find the highest frequency you can reliably hear.
    The Frequency Series:  10kHz 11k 12k 13k 14k 15k 16k 17k 18k 19k 20kHz

  • Find the smallest difference in pitch (frequency) you can hear. 
    The Pitch Series:  50c  20c  10c  5c  2c  1c 

  • Find the shortest timing difference you can reliably hear. NEW
    The Timing Series:  1ms  2ms  5ms  10ms  20ms  50ms  100ms 

  • Find the highest dynamic range offered by your listening environment. 
    The Dynamic Range Series:  36dB  42dB  48dB  54dB  60dB  66dB  72dB  78dB 

  • Do you have the absolute hearing ability? 
    The Perfect Pitch Blind Test:  C Scale  Chromatic 

  • Are your ears sensitive to Absolute Phase? 
    The Absolute Polarity Blind Test:  Here 

  • Can you hear a difference between 16-bit and 8-bit audio files? 
    The 16-bit v/s 8-bit Blind Test

For sound and studio engineers